Alumax 793 Manuel d'utilisateur télécharger pdf (Page 11)

G03711075

7-9-07

Page 10 of 11

- ALL DOORS

Carefully caulk the interior jamb-to-wall

and curb-to-base joints. For appearance, you may

wish to caulk the exterior joints as well. We

recommend you wait twenty-four hours before the

first shower to allow the caulking to cure properly.

Cut four pieces of the larger vinyl [HH] 1/

2" longer than the horizontal opening and trim the

ends on a 45° angle. Install the top exterior vinyl

starting at both ends and working toward the

middle. Be careful not to stretch the vinyl.

Install the top interior vinyl and the two bottom

vinyls in the same way.

Cut four pieces of the smaller vinyl [GG] 1"

longer than the vertical opening (to prevent

gapping from shrinkage) and trim the ends on a

45° angle. Using the masking tape guides, center

the glass panel [J] in the frame. Cut four short (1"

- 2") pieces of the small vinyl and press into both

jambs on each side to hold the glass temporarily.

Take one of the long pieces of vinyl, and starting

on the outside exterior jamb, press each end into

the frame and work toward the middle. Be careful

not to stretch the vinyl. Install the other three

pieces in a similar fashion.

GLASS PANEL

1 2 ... 6 7 8 9 10 11 12

Pas de commentaire

Alumax 793 Manuel d'utilisateur Page 11