Alumax K-NS93Z Manuel d'utilisateur télécharger pdf (Page 16)

WALL JAMB INSTALLATION

INSTALLATION MANUAL

Place the wall jambs against the wall so that

the holes are located towards the interior of the

shower. Center the opening of the wall jamb on

the line marked previously. Ensure verticality

with a level. Mark the holes position with pencil

using the holes of the wall jamb for reference.

Drill the holes in the wall with Ø1/4’’ drill bit.

To install the shower door on ceramic tiles, use

a Ø1/4’’ drill bit for ceramic tiles.

Insert one drop of silicone in each hole bored

in the wall before inserting the wall plug (x8) on

both side.

Screw the two wall jambs into the wall plugs

already installed in the wall by using screws

1 3/8’’ (x8). Ensure verticality with the level.

Put screw caps on the screw heads.

Insert the wall jambs into the expander and

place temporairaly the frame centred on the

threshold line marked previously.

4a.

4b.

4c.

4d.

4e.

K-NS93Z

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23

Pas de commentaire

Alumax K-NS93Z Manuel d'utilisateur Page 16